From a97e8d141b906ec93fcd1740e570acb2a0b08760 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Fri, 6 Nov 2026 12:03:03 +0100 Subject: [PATCH 1/4] Update DBC and protocol description Signed-off-by: Michael Heimpold --- docs/source/safety_protocol.rst | 63 ++++++++++++++++++++++++++------- docs/source/utils/uart_com.dbc | 55 +++++++++++++++++++--------- 2 files changed, 89 insertions(+), 29 deletions(-) diff --git a/docs/source/safety_protocol.rst b/docs/source/safety_protocol.rst index 25bbbc4..ce1c780 100644 --- a/docs/source/safety_protocol.rst +++ b/docs/source/safety_protocol.rst @@ -139,6 +139,15 @@ ChargeState2 - 0 - - This signal reports, if the controller is in safeState or not. + * - CS_Estop1ChargingAbort + - 41 + - 2 + - + - No + - 1 + - 0 + - + - *No description available* **Value Descriptions** @@ -176,7 +185,8 @@ ChargeState2 - 0xB = ID_Malfunction - 0xC = CE_Malfunction - 0xD = HVReady_Malfunction - - 0xE = EmergencyInput + - 0x10 = EmergencyInput + - 0x16 = ParameterFailure - **CS_SafeStateActive** @@ -184,6 +194,12 @@ ChargeState2 - 0x1 = SafeState - 0x3 = SNA +- **CS_Estop1ChargingAbort** + + - 0x0 = FALSE + - 0x1 = TRUE + - 0x3 = NotConfigured + **Bitfield Layout** :: @@ -201,15 +217,17 @@ ChargeState2 +---+---+---+---+---+---+---+---+ +-- CS_EStop_Reason +---+---+---+---+---+---+---+---+ - B 2 |<-----x| | | | | | | - y +---+---+---+---+---+---+---+---+ - t +-- CS_SafeStateActive - e +---+---+---+---+---+---+---+---+ - 3 | | | | | | | | | + 2 |<-----x| | | | | | | + B +---+---+---+---+---+---+---+---+ + y +-- CS_SafeStateActive + t +---+---+---+---+---+---+---+---+ + e 3 | | | | | | | | | +---+---+---+---+---+---+---+---+ 4 | | | | | | | | | +---+---+---+---+---+---+---+---+ - 5 | | | | | | | | | + 5 | | | | | | |<-----x| + +---+---+---+---+---+---+---+---+ + +-- CS_Estop1ChargingAbort +---+---+---+---+---+---+---+---+ 6 | | | | | | | | | +---+---+---+---+---+---+---+---+ @@ -637,6 +655,15 @@ InquiryPacket - 0 - - The ID, which message shall be requested. Supported values are described below. + * - ActionId + - 15 + - 8 + - + - No + - 1 + - 0 + - + - *No description available* **Value Descriptions** @@ -644,6 +671,16 @@ InquiryPacket - 0xA = FirmwareVersion - 0xB = GitHash + - 0x14 = PartNumber1 + - 0x15 = PartNumber2 + - 0x16 = ChipInfo + +- **ActionId** + + - 0x0 = No Action requested + - 0x1 = Start RCM Selftest + - 0x2 = Request Inlet Closing + - 0x3 = Request Inlet Opening **Bitfield Layout** @@ -657,12 +694,14 @@ InquiryPacket +---+---+---+---+---+---+---+---+ +-- PacketId +---+---+---+---+---+---+---+---+ - 1 | | | | | | | | | + 1 |<-----------------------------x| + +---+---+---+---+---+---+---+---+ + +-- ActionId + B +---+---+---+---+---+---+---+---+ + y 2 | | | | | | | | | + t +---+---+---+---+---+---+---+---+ + e 3 | | | | | | | | | +---+---+---+---+---+---+---+---+ - B 2 | | | | | | | | | - y +---+---+---+---+---+---+---+---+ - t 3 | | | | | | | | | - e +---+---+---+---+---+---+---+---+ 4 | | | | | | | | | +---+---+---+---+---+---+---+---+ 5 | | | | | | | | | diff --git a/docs/source/utils/uart_com.dbc b/docs/source/utils/uart_com.dbc index 07284e9..c0c3c9d 100644 --- a/docs/source/utils/uart_com.dbc +++ b/docs/source/utils/uart_com.dbc @@ -1,4 +1,4 @@ -VERSION "0.0.3" +VERSION "0.5.1" NS_ : @@ -38,19 +38,23 @@ BU_: chargeSOM_HostController chargeSOM_SafetyController CCY_HostController CCY_ BO_ 255 InquiryPacket: 8 chargeSOM_HostController SG_ PacketId : 7|8@0+ (1,0) [0|0] "" CCY_SafetyController,chargeSOM_SafetyController + SG_ ActionId : 15|8@0+ (1,0) [0|0] "" CCY_SafetyController,chargeSOM_SafetyController + +BO_ 254 ActionAck: 8 chargeSOM_SafetyController + SG_ ActionId : 7|8@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController BO_ 0 DigitalOutput: 8 chargeSOM_HostController - SG_ DO_SAFETY_HVSW3_PRECHARGE : 9|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_CP_INVERT : 3|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_CP_Dutycycle : 31|8@0+ (1,0) [0|0] "%" chargeSOM_SafetyController + SG_ DO_HV_SW1_Dutycycle : 39|8@0+ (1,0) [0|0] "%" chargeSOM_SafetyController + SG_ DO_HV_SW2_Dutycycle : 47|8@0+ (1,0) [0|0] "%" chargeSOM_SafetyController + SG_ DO_HV_SW3_Dutycycle : 55|8@0+ (1,0) [0|0] "%" chargeSOM_SafetyController SG_ DO_PP_SAE_IEC : 15|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_SAFETY_CP_STATE_C : 18|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController,CCY_SafetyController SG_ DO_SAFETY_GPIO_EXP : 12|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_SAFETY_IMD_OD_EN : 11|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_SAFETY_MOTOR_OUT2 : 5|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_SAFETY_MOTOR_OUT1 : 6|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController - SG_ DO_SAFETY_HVSW2_HS : 13|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController - SG_ DO_SAFETY_HVSW1_HS : 14|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController SG_ DO_PT1000_CTRLEN4 : 10|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController,CCY_SafetyController SG_ DO_PT1000_CTRLEN3 : 19|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController,CCY_SafetyController SG_ DO_PT1000_CTRLEN2 : 20|1@0+ (1,0) [0|0] "" chargeSOM_SafetyController,CCY_SafetyController @@ -65,19 +69,20 @@ BO_ 5 AnalogInput04: 8 chargeSOM_SafetyController SG_ AI_PT1000_CFB3_4 : 7|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController BO_ 4 AnalogInput03: 8 chargeSOM_SafetyController - SG_ AI_SAFETY_HVSW2_FB : 39|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController - SG_ AI_SAFETY_HVSW1_FB : 23|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController - SG_ AI_SAFETY_HVSW3_FB : 7|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController + SG_ AI_SAFETY_INLET_FB : 39|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController + SG_ AI_SAFETY_DEV1_ADC : 23|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController + SG_ AI_SAFETY_DEV2_ADC : 7|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController SG_ AI_PT1000_CFB1_2 : 55|16@0+ (1,0) [0|0] "" CCY_HostController,chargeSOM_HostController BO_ 3 AnalogInput02: 8 chargeSOM_SafetyController - SG_ AI_SAFETY_U_IN_ADC : 55|16@0+ (1,0) [0|0] "" chargeSOM_HostController + SG_ AI_SAFETY_MOTOR_CAPS_SENSE : 55|16@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ AI_PP_VALUE_ADC : 39|16@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ AI_CP_BUFFERED_POS_ADC : 23|16@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ AI_CP_BUFFERED_NEG_ADC : 7|16@0+ (1,0) [0|0] "" chargeSOM_HostController BO_ 19 AnalogInput05: 8 CCY_SafetyController - SG_ AI_HV_READY : 39|16@0+ (1,0) [0|0] "" CCY_HostController + SG_ AI_HV_READY_SW11_SC : 55|16@0+ (1,0) [0|0] "" CCY_HostController + SG_ AI_HV_READY_SW10_SC : 39|16@0+ (1,0) [0|0] "" CCY_HostController SG_ AI_CE_ADC : 23|16@0+ (1,0) [0|0] "" CCY_HostController SG_ AI_ID_ADC : 7|16@0+ (1,0) [0|0] "" CCY_HostController @@ -93,6 +98,7 @@ BO_ 17 ChargeControl2: 8 CCY_HostController BO_ 16 ChargeState2: 8 CCY_SafetyController SG_ CS_SafeStateActive : 23|2@0+ (1,0) [0|0] "" CCY_HostController + SG_ CS_Estop1ChargingAbort : 41|2@0+ (1,0) [0|0] "" CCY_HostController SG_ CS_EStop_Reason : 15|8@0+ (1,0) [0|0] "" CCY_HostController SG_ CS_ID_State : 3|4@0+ (1,0) [0|0] "" CCY_HostController SG_ CS_CE_State : 7|4@0+ (1,0) [0|0] "" CCY_HostController @@ -103,6 +109,9 @@ BO_ 7 ChargeState1: 8 chargeSOM_SafetyController SG_ CS_Estop1ChargingAbort : 41|2@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ CS_Estop2ChargingAbort : 43|2@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ CS_Estop3ChargingAbort : 45|2@0+ (1,0) [0|0] "" chargeSOM_HostController + SG_ CS_RcmStatus : 47|2@0+ (1,0) [0|0] "" chargeSOM_HostController + SG_ CS_Estop4IMDChargingAbort : 57|2@0+ (1,0) [0|0] "" chargeSOM_HostController + SG_ CS_InletState : 23|3@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ CS_Contactor1State : 33|2@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ CS_Contactor2State : 35|2@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ CS_Contactor3State : 37|2@0+ (1,0) [0|0] "" chargeSOM_HostController @@ -132,6 +141,15 @@ BO_ 10 FirmwareVersion: 8 chargeSOM_SafetyController BO_ 11 GitHash: 8 chargeSOM_SafetyController SG_ HashSignal : 7|64@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController +BO_ 20 PartNumber1: 8 chargeSOM_SafetyController + SG_ PartNumber1Signal : 7|64@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController + +BO_ 21 PartNumber2: 8 chargeSOM_SafetyController + SG_ PartNumber2Signal : 7|64@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController + +BO_ 22 ChipInfo: 8 chargeSOM_SafetyController + SG_ MCUVersion : 7|8@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController + BO_ 14 ErrorMessage: 8 chargeSOM_SafetyController SG_ ErrorAddData2 : 55|16@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController SG_ ErrorAddData1 : 39|16@0+ (1,0) [0|0] "" chargeSOM_HostController,CCY_HostController @@ -163,12 +181,7 @@ BO_ 1 DigitalInput: 8 CCY_SafetyController SG_ DI_SAFETY_MOTOR_OUT1 : 6|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_SAFETY_MOTOR_OUT2 : 5|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_SAFETY_MOTOR_FAULT : 4|1@0+ (1,0) [0|0] "" chargeSOM_HostController - SG_ DI_SAFETY_HVSW2_HS : 13|1@0+ (1,0) [0|0] "" chargeSOM_HostController - SG_ DI_SAFETY_HVSW1_HS : 14|1@0+ (1,0) [0|0] "" chargeSOM_HostController - SG_ DI_SAFETY_HVSW3_PRECHARGE : 9|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_PP_SAE_IEC : 15|1@0+ (1,0) [0|0] "" chargeSOM_HostController - SG_ DI_SAFETY_DEV_1 : 0|1@0+ (1,0) [0|0] "" chargeSOM_HostController - SG_ DI_SAFETY_DEV_2 : 1|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_EV_CP_EDGE : 2|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_CP_INVERT : 3|1@0+ (1,0) [0|0] "" chargeSOM_HostController SG_ DI_SAFETY_K1_IN : 7|1@0+ (1,0) [0|0] "" chargeSOM_HostController @@ -190,6 +203,9 @@ BO_TX_BU_ 4 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 2 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 10 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 11 : CCY_SafetyController,chargeSOM_SafetyController; +BO_TX_BU_ 20 : CCY_SafetyController,chargeSOM_SafetyController; +BO_TX_BU_ 21 : CCY_SafetyController,chargeSOM_SafetyController; +BO_TX_BU_ 22 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 14 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 8 : CCY_SafetyController,chargeSOM_SafetyController; BO_TX_BU_ 1 : chargeSOM_SafetyController,CCY_SafetyController; @@ -244,17 +260,22 @@ BA_DEF_ "BusType" STRING ; BA_DEF_DEF_ "MultiplexExtEnabled" "No"; BA_DEF_DEF_ "BusType" ""; BA_ "BusType" "J1708"; -VAL_ 255 PacketId 10 "FirmwareVersion" 11 "GitHash" ; +VAL_ 255 PacketId 10 "FirmwareVersion" 11 "GitHash" 20 "PartNumber1" 21 "PartNumber2" 22 "ChipInfo" ; +VAL_ 255 ActionId 0 "No Action requested" 1 "Start RCM Selftest" 2 "Request Inlet Closing" 3 "Request Inlet Opening"; VAL_ 17 CC_CCSReady 2 "CCS_EmergencyStop" 1 "CCS_Ready" 0 "CCS_NotReady" ; VAL_ 16 CS_SafeStateActive 3 "SNA" 1 "SafeState" 0 "NormalState" ; -VAL_ 16 CS_EStop_Reason 14 "EmergencyInput" 13 "HVReady_Malfunction" 12 "CE_Malfunction" 11 "ID_Malfunction" 10 "Temp4_Overtemp" 9 "Temp3_Overtemp" 8 "Temp2_Overtemp" 7 "Temp1_Overtemp" 6 "Temp4_Malfunction" 5 "Temp3_Malfunction" 4 "Temp2_Malfunction" 3 "Temp1_Malfunction" 2 "ComTimeout" 1 "InternalError" 0 "NoStop" ; +VAL_ 16 CS_Estop1ChargingAbort 0 "FALSE" 1 "TRUE" 3 "NotConfigured" ; +VAL_ 16 CS_EStop_Reason 22 "ParameterFailure" 16 "EmergencyInput" 13 "HVReady_Malfunction" 12 "CE_Malfunction" 11 "ID_Malfunction" 10 "Temp4_Overtemp" 9 "Temp3_Overtemp" 8 "Temp2_Overtemp" 7 "Temp1_Overtemp" 6 "Temp4_Malfunction" 5 "Temp3_Malfunction" 4 "Temp2_Malfunction" 3 "Temp1_Malfunction" 2 "ComTimeout" 1 "InternalError" 0 "NoStop" ; VAL_ 16 CS_ID_State 3 "Invalid" 2 "Connected" 1 "Not Connected" 0 "Unknown" ; VAL_ 16 CS_CE_State 7 "Invalid" 6 "EC" 5 "E" 4 "C" 3 "B" 2 "B0" 1 "A" 0 "Unknown" ; -VAL_ 7 CS_SafeStateReason 18 "EmergencyInput3" 17 "EmergencyInput2" 16 "EmergencyInput1" 15 "HVSW_Malfunction" 14 "CP_DiodeFault" 13 "CP_ShortCircuit" 12 "CP_Malfunction" 11 "PP_Malfunction" 10 "Temp4_Overtemp" 9 "Temp3_Overtemp" 8 "Temp2_Overtemp" 7 "Temp1_Overtemp" 6 "Temp4_Malfunction" 5 "Temp3_Malfunction" 4 "Temp2_Malfunction" 3 "Temp1_Malfunction" 2 "ComTimeout" 1 "InternalError" 0 "NoStop" ; +VAL_ 7 CS_SafeStateReason 22 "ParameterFailure" 21 "RCM_SelftestFailed" 20 "RCM_Error" 19 "EmergencyInput4IMD" 18 "EmergencyInput3" 17 "EmergencyInput2" 16 "EmergencyInput1" 15 "HVSW_Malfunction" 14 "CP_DiodeFault" 13 "CP_ShortCircuit" 12 "CP_Malfunction" 11 "PP_Malfunction" 10 "Temp4_Overtemp" 9 "Temp3_Overtemp" 8 "Temp2_Overtemp" 7 "Temp1_Overtemp" 6 "Temp4_Malfunction" 5 "Temp3_Malfunction" 4 "Temp2_Malfunction" 3 "Temp1_Malfunction" 2 "ComTimeout" 1 "InternalError" 0 "NoStop" ; VAL_ 7 CS_SafeStateActive 3 "SNA" 1 "SafeState" 0 "NormalState" ; VAL_ 7 CS_Estop1ChargingAbort 0 "FALSE" 1 "TRUE" 3 "NotConfigured" ; VAL_ 7 CS_Estop2ChargingAbort 0 "FALSE" 1 "TRUE" 3 "NotConfigured" ; VAL_ 7 CS_Estop3ChargingAbort 0 "FALSE" 1 "TRUE" 3 "NotConfigured" ; +VAL_ 7 CS_Estop4IMDChargingAbort 0 "FALSE" 1 "TRUE" 3 "NotConfigured" ; +VAL_ 7 CS_RcmStatus 0 "NotConfigured" 1 "MONITORING" 2 "SELFTEST" 3 "ERROR" ; +VAL_ 7 CS_InletState 0 "UNDEFINED" 1 "OPEN" 2 "OPENING" 3 "CLOSED" 4 "CLOSING" 5 "ERROR" 7 "NotConfigured" ; VAL_ 7 CS_Contactor1State 0 "UNDEFINED" 1 "OPEN" 2 "CLOSE" 3 "NotConfigured" ; VAL_ 7 CS_Contactor2State 0 "UNDEFINED" 1 "OPEN" 2 "CLOSE" 3 "NotConfigured" ; VAL_ 7 CS_Contactor3State 0 "UNDEFINED" 1 "OPEN" 2 "CLOSE" 3 "NotConfigured" ; From a1f8d06ccb8926fbad252b89ffc25996eca6e2c4 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Fri, 6 Nov 2026 12:03:50 +0100 Subject: [PATCH 2/4] Fix branch name for CCY Signed-off-by: Michael Heimpold --- README.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.rst b/README.rst index 847d7af..56f36d2 100644 --- a/README.rst +++ b/README.rst @@ -19,7 +19,7 @@ Repo Initialization This repository is using git submodules to share documents between the user guides. After cloning of the project please execute the following commands: -git checkout everest/charge_som +git checkout everest/charge_control_y git submodule update --init --force --remote From fe98a0584207253c63dba39e87110b544d4588d9 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Fri, 6 Nov 2026 12:06:26 +0100 Subject: [PATCH 3/4] Update parameter block documentation Signed-off-by: Michael Heimpold --- .../safety_controller_parameterization.rst | 24 +++++++++++++------ 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/docs/source/safety_controller_parameterization.rst b/docs/source/safety_controller_parameterization.rst index 939c7a3..090d5c2 100644 --- a/docs/source/safety_controller_parameterization.rst +++ b/docs/source/safety_controller_parameterization.rst @@ -28,7 +28,7 @@ To make the handling of parameters human-friendly, all parameters can be put tog .. code-block:: yaml - version: 1 + version: 3 pt1000s: - abort-temperature: 75.0 °C resistance-offset: 0.85 Ω @@ -95,12 +95,22 @@ Emergency Input Configuration ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The safety controller can monitor up to 3 emergency inputs, however on Charge Control Y only one physical -emergency input is available. So the second and third inputs must kept disabled. +emergency input is available. So the second and third inputs must be kept disabled. Possible configuration values for the first one are: - `disabled` - `active-low` +- `active-high` + +When this emergency input is used, the selected setting should usually be `active-low` due to the +internal circuit of the Charge Control Y: it checks the voltage of the emergeny input pin for 24 V +and raises an internal 3.3 V signal when the voltage is lower or higher than 24 V. + +.. important:: + + While the setting `active-high` is possible, it should be used with care since in this case, + it would not be possible to detect a broken wiring in such a setup. Installing a Parameter Block @@ -114,7 +124,7 @@ The following session transcript shows how the install procedure works: # create a YAML file on-the-fly $ cat < /tmp/my-parameters.yaml - version: 1 + version: 3 pt1000s: - abort-temperature: 75.0 °C resistance-offset: 0.85 Ω @@ -125,7 +135,7 @@ The following session transcript shows how the install procedure works: contactors: - with-feedback-normally-open - - disabled + - with-feedback-normally-open - disabled estops: @@ -135,7 +145,7 @@ The following session transcript shows how the install procedure works: EOL # convert YAML to binary - ra-pb-create -i /tmp/my-parameters.yaml -o /tmp/my-parameters.bin + ra-pb-create --version-from-yaml -i /tmp/my-parameters.yaml -o /tmp/my-parameters.bin # stop EVerest - to have exclusive access to safety controller systemctl stop everest @@ -154,7 +164,7 @@ To check which settings are currently used by the safety controller firmware, it .. code-block:: sh - systemctl stop everest - ra-update -a data dump | ra-pb-dump + systemctl stop everest + ra-update dump-pb | ra-pb-dump This will print the current settings in YAML format on stdout. From e4a15d77872a935b5e5ff1373352282dad348be2 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Tue, 10 Nov 2026 12:36:37 +0100 Subject: [PATCH 4/4] Update docs/source/safety_controller_parameterization.rst Co-authored-by: barsnick --- docs/source/safety_controller_parameterization.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/source/safety_controller_parameterization.rst b/docs/source/safety_controller_parameterization.rst index 090d5c2..6583dbb 100644 --- a/docs/source/safety_controller_parameterization.rst +++ b/docs/source/safety_controller_parameterization.rst @@ -104,7 +104,7 @@ Possible configuration values for the first one are: - `active-high` When this emergency input is used, the selected setting should usually be `active-low` due to the -internal circuit of the Charge Control Y: it checks the voltage of the emergeny input pin for 24 V +internal circuit of the Charge Control Y: it checks the voltage of the emergency input pin for 24 V and raises an internal 3.3 V signal when the voltage is lower or higher than 24 V. .. important::