ASWUnitTests - https://github.com/ASWSoftware/asw-unit-tests

ASWUnitTests is a speedy light-weight C++ unit test tool for Windows and Linux projects.

Requires C++17 or higher; the project itself is built and tested at C++20.

Features

Writing Tests

Self-registering test groups - ASW_REGISTER_TEST_GROUP adds a test module without editing any framework file.
Self-registering test methods - ASW_TEST defines a test method and registers it with its group, so a test can't be written but left out of the group's constructor.
Test suites - TSuitePath puts groups in nested suites, so --filter "Framework.*" selects a whole suite, and the VCL GUI runner shows suites in its tree.
Check and Assert methods - Check* records a failure and lets the test continue; Assert* fails the test immediately. Covers Equals/NotEquals, True/False, Null/NotNull, Same/NotSame, Empty/NotEmpty, IsType/IsNotType, Near/NotNear, Contains/NotContains, StartsWith/EndsWith (and their Not forms), Matches/NotMatches (regular expression), EqualsMem/NotEqualsMem (bytes), and GreaterThan/LessThan (and their OrEqual forms), plus case-insensitive IC variants of the string Equals, Contains, StartsWith and EndsWith methods.
Automatic call site (C++20) - Overloads taking a std::source_location report the caller's function and line, without passing __func__, __LINE__.
Floating-point comparison - CheckNear()/AssertNear() compare float and double values within a tolerance.
Expected exceptions - SetExceptionExpected(), with an optional check of the exception's type and message, and CheckThrows()/CheckNoThrow() for a single call.
Parameterized tests - RegisterTestCases() registers one named test case per row of data.
Failing tests - Fail() fails a test unconditionally, e.g. on a code path it should never reach.
Skipping tests - Skip() reports a test as skipped, unconditionally or after a runtime check.
Setup and teardown hooks - SetUp_Group()/TearDown_Group() run around each group, and SetUp_Test()/TearDown_Test() around each test.

Running Tests

Filtering and listing - --filter selects tests by wildcard pattern; --list previews the matches without running them.
Shuffled order - --shuffle randomizes the run order to expose hidden coupling between tests; --shuffle-seed reproduces a given order.
Parallel partitions - --partition-index/--partition-count split the suite across separate processes, e.g. a CI job matrix.
Hang protection - --test-timeout-seconds aborts the run if a single test doesn't finish in time, instead of blocking forever.
Crash protection - --catch-crashes records a native crash (e.g. an access violation) as a failed test instead of losing the whole process.
Unexpected exceptions - An exception a test throws without expecting it fails only that test, with the exception's message, and the run carries on.
VCL GUI runner - A RAD Studio VCL app that runs the same tests, with a checkbox tree to choose them, live pass/fail/skip status, and each failure's details and log.

Reporting

JUnit XML report - --report-junit writes a report that most CI systems read natively.
Colored console output - Configurable pass/fail/skip colors, with automatic terminal detection and NO_COLOR support.
Per-test timing - Every test logs its duration, making slow tests easy to spot.
Meaningful exit codes - Distinguish failed tests, unhandled exceptions, invalid arguments, timeouts, and crashes.

Platforms and Integration

Portable - Windows and Linux, with MSVC, MinGW, GCC, Clang, and RAD Studio's Clang-based compilers. Requires C++17 or later, with no third-party dependencies.
Drop-in submodule - Add the repository as a git submodule and build its src folder alongside your own tests, with ASWUnitTests_Sources.cmake for CMake projects.
RAD Studio RTL exceptions - Opt-in support for VCL/FMX Exception classes such as EConvertError, and for System::String in the string checks, via ASWUNITTESTS_RTL_EXCEPTIONS.

For the full list of Check/Assert methods, see src/ASWUnitTests_TestBase.h. For working examples, see the tests folder, e.g. tests/Test_ASWTools_String.cpp for SetExceptionExpected().

Donations:

If you find ASWUnitTests helpful, donations are always appreciated:

PayPal: donate@aswsoftware.com

Bitcoin: 15rKqL1numHJyE36ottMbhs5cmCjJkuowV

How to Use

Important! Tests should be run outside of the debugger, unless you really want to see every exception that occurs, due to the nature of unit testing.

For examples of how to use, see the tests and toTest folders and src\ASWUnitTests_Handler.cpp.

ASWUnitTests is intended to exist in a sub folder within your project, typically as a git submodule. See Submodule Integration below for how to wire it. The toTest folder is an example of source that is to be tested. While this example folder exists in the root of this project, your source should be wherever you like.

CMake

The cmake folder contains a portable CMake project for building with CMake, JetBrains CLion, Visual Studio, Clang, or MinGW. From the repository root, configure and build it with:

cmake -S cmake -B build
cmake --build build --config Release

The executable is written to build/bin/Release/ASWUnitTests.exe with multi-configuration generators. The RAD Studio project writes its final executable to the same build/bin/<Config> directory.

The CMake project does not need a separate version declaration (see Versions) because it currently builds the test executable directly rather than packaging or installing it.

Versions

ASWUnitTests follows Semantic Versioning, shown by --version and the VCL GUI's caption. Releases are tagged on main (e.g. v1.1.0). Between releases, the develop branch carries the next planned version with a pre-release, e.g. 1.2.0-dev.1, which comes before 1.2.0. src/ASWUnitTests_Version.h has the version as macros, for code that supports several ASWUnitTests versions, and as constants in the ASWUnitTests namespace:

#include "ASWUnitTests_Version.h"

#if ASWUNITTESTS_VERSION_MAJOR > 1 || (ASWUNITTESTS_VERSION_MAJOR == 1 && ASWUNITTESTS_VERSION_MINOR >= 1)
    // Uses something added in 1.1 (also present in 1.1.0-dev.N builds)
#endif

Command Line Options

ASWUnitTests [options]

  --filter <pattern>   Run only tests whose full name matches <pattern>. A full name is
                       "GroupName.TestName", prefixed by "Suite.Path." for a group in a suite.
                       '*' matches any sequence of characters (including none); '?' matches
                       exactly one character. The whole name must match, e.g. "*String*" for
                       a substring search.
  --filter-ignore-case Match --filter's <pattern> case-insensitively. Has no effect without
                       --filter.
  --shuffle            Run groups, and each group's tests, in a randomized order instead of
                       the default deterministic order. The seed used is logged so a failure
                       caused by order can be reproduced via --shuffle-seed.
  --shuffle-seed <N>   Shuffle (implies --shuffle) using an explicit unsigned integer seed,
                       to reproduce a previous --shuffle run's order.
  --partition-index <N> 1-based index of this run's partition, from 1 to --partition-count.
                       Requires --partition-count.
  --partition-count <N> Splits the full test suite into <N> roughly-equal partitions by each
                       test's position in the canonical registration order (the same order
                       --list shows), so every test runs in exactly one partition regardless
                       of which group it's in. Run <N> separate invocations (e.g. one per CI
                       job), each with its own --partition-index, to run the suite in
                       parallel with no coordination between processes. Requires
                       --partition-index.
  --test-timeout-seconds <N>
                       Abort the run if any single test does not finish within <N> seconds. The
                       offending test is recorded as failed (with a message explaining why) and no
                       further tests or groups run afterward. There is no default; a hung test runs
                       indefinitely unless this is given.
  --catch-crashes      Catch a native crash (e.g. an access violation or segmentation fault) in a
                       test and record it as failed instead of letting it take down the whole
                       process. Most crash types let the run continue with the next test; a few (a
                       stack overflow on Windows, or any segmentation fault on POSIX, which can't
                       be cheaply told apart from a stack overflow there) abort the run afterward
                       instead, the same way --test-timeout-seconds does. Never attempts to catch
                       SIGABRT. Off by default; a crash terminates the process as usual unless this
                       is given.
  --color <mode>       One of "auto" (default; color only on an interactive terminal that
                       supports it, and only if the NO_COLOR environment variable isn't set),
                       "always", or "never".
  --no-color           Shorthand for --color never.
  --color-pass/--color-fail/--color-skip <color>
                       Set the color used for passed/failed/skipped status text. <color> is
                       one of: default, black, red, green, yellow, blue, magenta, cyan, white,
                       or bright-<name> for the bright variant (e.g. bright-red). Defaults:
                       pass=green, fail=red, skip=yellow.
  --report-junit <path> Write a JUnit-style XML test report to <path>, in addition to the
                       normal console output. Recognized by most CI systems (GitHub Actions,
                       GitLab CI, Jenkins, Azure DevOps, CircleCI) for native test result
                       reporting.
  --project-name <name> Set the name this run is identified by: shown in the console's
                       "Initializing..." line and, if --report-junit is also given, used as
                       the report's <testsuites name="..."> attribute (default: "ASWUnitTests").
                       Set this to your own project's name so console output and CI dashboards
                       both identify the run correctly.
  --list               List all registered tests by full name (see --filter) and exit, without
                       running anything. Combine with --filter to preview a pattern's matches
                       before running it.
  --pause              Prompt "press enter to continue" before exiting after a --list command
                       or test run. Useful when an IDE's Run command closes the console
                       immediately, so its output can't be read; set this as an argument in
                       that IDE's own run configuration.
  --version            Print the framework version and exit.
  --help               Show usage and exit.

The console output always states whether a filter is active (and its pattern) before running or listing tests, and --list reports how many tests/groups matched out of the total registered, so when output is redirected to a file, there's a record of why fewer tests ran or were listed than expected. Likewise, it always states whether shuffle is enabled and, if so, the seed in use.

--shuffle is a sanity check against hidden inter-test/inter-group coupling. The deterministic alphabetical default (see Registering Tests) is for readable, reproducible output day-to-day, while --shuffle deliberately breaks that to surface tests that secretly depend on running in a particular order (e.g. via shared static/global state). If --shuffle causes a failure, rerun with the logged seed via --shuffle-seed to reproduce it exactly while debugging. A seed gives the same order with every compiler and platform, and adding --filter keeps the matching tests in the order that seed gives the full suite, so you can narrow the rerun down to the tests involved. A suite's groups are shuffled among themselves, so they still run together.

--partition-index/--partition-count split the suite for parallel execution across separate OS processes. Each invocation still runs single-threaded and writes to its own console/JUnit output. Partitioning is by each test's position in the canonical registration order, not by group, so one large group doesn't dominate a single partition. Partition membership is independent of --shuffle, since it's computed from the canonical order rather than any shuffled one, so a given test's partition never changes based on whether --shuffle is also passed. A typical setup is a CI job matrix, e.g. 4 jobs each running: --partition-index <1..4> --partition-count 4 --report-junit results-<index>.xml. ASWUnitTests doesn't merge those reports itself, since most CI systems (GitHub Actions, GitLab CI, Jenkins, Azure DevOps, CircleCI) already merge multiple JUnit XML files from parallel jobs natively. Combine --partition-index/--partition-count with --list to preview which tests land in a given partition, the same way --list can preview --filter.

--test-timeout-seconds guards against a single test hanging (e.g. an infinite loop) forever. There is no default; without it, a hung test blocks the run indefinitely. When given, each test runs on its own worker thread while the main thread waits with that timeout; a test that finishes normally (whether it passes, fails, or throws) is completely unaffected. A test that doesn't finish in time is recorded as failed, with a message naming it and the timeout that was exceeded, and the run stops there: no further tests or groups run, and the process exits with a dedicated exit code (5) distinct from an ordinary test failure (1). If --report-junit was also given, the report still gets written, covering every test that completed before the timeout, plus the timed-out test's own synthetic failure entry. The abandoned worker thread itself is never joined or forcibly stopped, since there is no safe, portable way to interrupt a thread that may be stuck in an infinite loop. If the test ends after all, moments later, its Check failures, its Log() lines and its outcome from then on never reach the results, the log or a run observer. A test that has already begun recording its outcome when the timeout comes counts as finished in time instead. Since that thread may still be using its test group, the runner then ends without destroying the test groups, as it does after a crash that aborts the run (see --catch-crashes below).

--catch-crashes guards against a single test crashing (e.g. dereferencing a null pointer) and taking down the whole process with it. There is no default; without it, a crashing test still crashes the process as usual. On Windows (MSVC, MinGW, and RAD Studio's Clang-based 32/64-bit compilers alike) this is implemented with AddVectoredExceptionHandler rather than __try/__except: the latter is the textbook approach and unwinds C++ objects properly when it works, but it silently fails to catch anything at runtime under RAD Studio's compilers even though it compiles, and GCC/MinGW does not implement the keywords at all, so this framework only relies on the mechanism it directly verified actually works, across all four Windows compiler targets, including recovering from a genuine stack overflow. On POSIX (Linux/Mac) it's a signal handler for SIGSEGV/SIGFPE/SIGILL/SIGBUS that jumps back to a point just before the test started; SIGABRT is never caught, since it usually means the C runtime itself already detected the process's state is corrupt and is deliberately terminating rather than letting it continue.

A crash that's caught still gets recorded as a failed test, with a message describing the fault, exactly like any other failure; if --report-junit was also given, it shows up in the report the same way. Most crash types let the run continue with the next test afterward, since the whole point of catching it (unlike a timeout, which can only abandon-and-abort) is that the harness can safely keep going. A few specific crash types abort the run afterward instead, with a dedicated exit code (6) distinct from an ordinary test failure (1), which is what a continued-past crash still shows up as: a Windows stack overflow (EXCEPTION_STACK_OVERFLOW is unambiguous), or any SIGSEGV on POSIX. That second one is a deliberate platform difference, not an oversight: unlike Windows, POSIX delivers a stack overflow and an ordinary segfault as the exact same signal, and reliably telling them apart needs inspecting the faulting address against the thread's stack bounds - real extra complexity for what's already treated as an edge case on both platforms. The practical effect is that the same ordinary null-pointer dereference continues the run on Windows but aborts it on Linux/Mac. Catching a genuine stack overflow at all on POSIX (as opposed to distinguishing it from an ordinary segfault) does rely on sigaltstack()/SA_ONSTACK: the default signal handler would otherwise run on the same, already-exhausted stack that just overflowed, leaving it nowhere to run and crashing the process for real instead.

Recovering from a crash at all is a raw jump back to before the test started (the same fundamental technique --test-timeout-seconds' abandoned worker thread relies on, for a different reason): it does not run destructors for any objects that were under construction on the crashing test's stack at the moment of the fault. This is a real, accepted limitation of recovering from a hardware-level fault, on any platform, not an oversight either.

Pass/fail/skip status text is colorized when writing to an interactive terminal that supports ANSI escape codes. Output redirected to a file or pipe, or a non-interactive CI log, automatically gets plain text with no escape codes, unless --color=always forces it (e.g. for a CI system that supports ANSI in its own log viewer). The NO_COLOR environment variable is also respected in the default auto mode.

Every test logs a Finished test: "GroupName.TestName" - passed/failed/skipped (N.NNN ms) line on completion, timing from just before SetUp_Test to just after the test's outcome is determined. This is useful for spotting slow tests without needing an external profiler.

--report-junit produces a standard <testsuites>/<testsuite>/<testcase> report. One <testsuite> per test group, with <failure>/<skipped> elements carrying the same detail message shown on the console. A group in a suite is named by its qualified name (e.g. Framework.Console.TTest_TConsole), in its <testsuite>'s name and each <testcase>'s classname; suites don't get <testsuite> elements of their own. --project-name sets both the console's Initializing... line and the report's <testsuites name="..."> attribute.

Exit codes: 0 all run tests passed or were skipped (or --version/--list/--help completed), 1 one or more tests failed, 2 a std::exception (or, with RTL exception support enabled, an RTL Exception) from SetUp_Test(), TearDown_Test() or TearDown_Group() ended the run, 3 an exception of any other type from one of those ended the run, 4 invalid command line arguments, 5 a test exceeded --test-timeout-seconds and the run was aborted, 6 a test crashed severely enough (with --catch-crashes given) that the run was aborted. An exception a test throws without expecting it (outside a Check*/Assert* call, with no SetExceptionExpected()) only fails that test, with Unexpected exception: and the exception's message as its detail, and the run carries on, so it's an ordinary test failure (exit code 1), not 2 or 3. Likewise, a crash caught by --catch-crashes that didn't force an abort is an ordinary test failure (exit code 1), not 6. An exception from a group's SetUp_Group() doesn't end the run either: each of the group's tests that would have run fails, with SetUp_Group() exception: and the exception's message as its detail, TearDown_Group() still runs, and the run carries on with the next group (exit code 1). Skipped tests never affect the exit code.

VCL GUI Runner

vcl\gui\rad370\ASWUnitTests_VCL_GUI.cbproj builds a RAD Studio VCL application that runs the same tests as the console runner, in a window for choosing tests and reading their results. It runs this repository's full self-test suite, and its Build_*.bat scripts write the executable to vcl\gui\rad370\<Platform>\<Config>. vcl\gui\rad370\ASWUnitTests_VCL_Group.groupproj opens it together with the VCL console project.

The window shows:

Test tree - Every registered test under its group, and each group under its suite, if any, with a check box to choose what runs (all are checked at first) and a colored dot for its status: gray not run, blue running, green passed, red failed, amber skipped. A group's or suite's check box and dot summarize its tests, including those in the suites inside it. View > Expand All and View > Collapse All expand every suite and group, or collapse the tree to its top-level ones; changing the filter expands it all again.
Detail pane - The selected test's result, duration, failure or skip detail, and its own log output, or how many of a selected group's or suite's tests have each status.
Failures & Skips - Every failed or skipped test in the latest run. Double-click one to select it in the tree.
Log - The run's full output, with failures in red and skips in amber.
Progress and status bars - Progress (red once anything fails), counts, elapsed time, and the run's status.

The toolbar, whose commands are also in the Run and Tests menus:

Run Selected (F9) runs the checked tests, and Run Failed reruns the latest run's failures.
Stop ends the run after the current test. Closing the window during a run does the same, then closes.
Select All and Select None check or uncheck every shown test, and Select Failed checks only the shown tests that failed in the latest run.
Copy Details (Ctrl+Shift+C) copies the detail pane to the clipboard.
Filter (Ctrl+F) shows only the tests whose Group.Test name contains its text, ignoring case, with the same * and ? wildcards as --filter. While it hides tests, checking them and Run Selected only apply to the shown ones, and hidden tests keep their check marks.

File > Export JUnit Report saves the latest run's results as the same JUnit XML report --report-junit writes, for when --report-junit wasn't given, or to keep a copy. The Help menu shows the command line options (the same text as --help) and the framework version.

Options > Run in Shuffled Order runs the groups, and each group's tests, in a random order, like --shuffle. Options > Shuffle Seed... chooses between a new random seed for each run and one seed for every run, like --shuffle-seed, and clicking OK also turns shuffling on. The status bar shows the seed: the one every run uses, or the latest run's. Shuffle Seed... offers that seed, so choosing it reruns tests in the same order, Run Failed included, to track down a failure that depends on the order. Both settings start from the command line and aren't saved.

When the window closes, it saves its size, position, maximized state, and panel sizes to %APPDATA%\ASWUnitTests\<exe name>.ini, and restores them the next time it opens. A position on a monitor that's no longer connected is ignored. An --exit run doesn't save the layout. View > Reset Layout restores the default layout right away; --layout-ignore and --layout-reset (below) control this from the command line.

The window also remembers which tests are checked, in %APPDATA%\ASWUnitTests\<exe name>.selection, as long as the command line doesn't choose them itself (no --run, --filter, or partition options). What it saves is what Run Selected would run, the checked tests that are shown; the filter box itself starts empty. Since tests come and go between sessions, it adapts:

A test that's been removed is skipped.
A new test (or a renamed one, which looks the same) is checked if its group was entirely checked, and otherwise isn't. A test in a new group is checked only if every test was.
If none of the checked tests still exist, every test is checked instead.

The log notes what was restored. So Select Failed, closing the window, fixing the code, and reopening it leaves just those tests checked for Run Selected.

Tests run on the main (VCL) thread, so a test can create forms and controls. --test-timeout-seconds runs each test on a worker thread instead, so it can't be combined with tests like that; the log says so when it's given.

A run that a test's timeout or crash abandoned leaves Run Selected and Run Failed disabled until the GUI is restarted, since the timed-out test may still be running, and a crash may have left the tests' state corrupted. Closing the window then ends the process without destroying the test groups, as the console runner does.

The GUI takes the same command line options as the console runner, with these differences:

--filter and --partition-index/--partition-count choose which tests start out checked, instead of the saved selection, and --filter's pattern also fills in the filter box. The box shows every test the pattern matches (and maybe a few more, left unchecked, since the box ignores case and matches anywhere in the name).
--project-name is also shown in the window's caption.
--shuffle and --shuffle-seed set the Options menu's shuffle settings, which can then be changed.
--report-junit writes the report after every run, including Run Failed.
--list, --pause, and the color options are ignored, with a note in the log.
--help, --version, and argument errors are shown in a dialog, and the GUI then exits without opening.
--run (GUI-only) runs the checked tests as soon as the window opens.
--exit (GUI-only, requires --run) closes the window when that run finishes, and exits with the same code the console runner would; a run ended with Stop exits with 1. Without --exit, the GUI always exits with 0.
--layout-ignore (GUI-only) neither loads nor saves the window layout, so the window opens with the defaults and the saved layout is left as it is.
--layout-reset (GUI-only) deletes the saved window layout and opens with the defaults, which is a way to recover if a saved layout ever causes a problem. The layout is saved again when the window closes.

A GUI process doesn't make a Windows command prompt wait for it, so a script that needs --exit's exit code should start it with start /wait (or its own language's equivalent):

start /wait ASWUnitTests_VCL_GUI.exe --filter "*String*" --run --exit --report-junit results.xml
echo %ERRORLEVEL%

To run your own tests in the GUI, create a RAD Studio VCL application that defines ASWUNITTESTS_RTL_EXCEPTIONS, and add to it: the framework's src files except main.cpp; the files in vcl\gui\src, including ASWUnitTests_GUI_MainForm.dfm; your own test modules; and a WinMain() modeled on vcl\gui\rad370\ASWUnitTests_VCL_GUI.cpp, which parses the command line and starts the main form.

The GUI is built on ITestRunObserver (in src\ASWUnitTests_TestBase.h), set with TTestHandler::SetRunObserver(). An observer receives the log output that would otherwise go to std::cout, as plain text without the console's color codes, is told as each test starts and finishes, and can stop a run between tests, so it can drive other kinds of runners too.

Registering Tests

Test modules self-register with TTestHandler using the ASW_REGISTER_TEST_GROUP macro (declared in src\ASWUnitTests_Registry.h). No file in src ever needs to be modified to add, remove, or rename a test module. This makes it easy to drop ASWUnitTests into another repository (e.g. as a git submodule). Place the macro at file scope, after the closing brace of the ASWUnitTests namespace, in the test module's .cpp file:

// Whatever includes at the top of the file for your `TMyClassToTest` class, etc.
#include "ASWUnitTests_Registry.h"

namespace ASWUnitTests
{
    // ... TTest_TMyClassToTest class implementation ...

} // namespace ASWUnitTests

ASW_REGISTER_TEST_GROUP(ASWUnitTests::TTest_TMyClassToTest)

Only the test module's own .cpp/.h files need to be added to your project's build (CMake, RAD Studio, etc.). See tests\Test_ASWTools_String.cpp and tests\Test_ASWTools_Random.cpp for working examples.

By default, groups run in alphabetical order by group name, deterministically across compilers and linkers. To override that for a specific group, instead use ASW_REGISTER_TEST_GROUP_ORDERED(ClassName, order). Groups run in ascending order, with ties broken alphabetically:

ASW_REGISTER_TEST_GROUP_ORDERED(ASWUnitTests::TTest_TMyClassToTest, -1) // runs before the alphabetical block

Run order is purely for readable, reproducible output. A group's SetUp_Group/TearDown_Group should still make no assumption about which other groups have or haven't already run.

A group whose constructor throws doesn't stop the run. It's logged at startup as !!ERROR!!, and a group named after its class as the registration macro gives it (e.g. ASWUnitTests::TTest_TMyClassToTest), in the suite the registration names, stands in for it, with one test, (construction), which fails with Test group class "..." could not be created: and the exception's message. The rest of the run goes on as usual, and it ends with exit code 1. The exceptions to this are a duplicate test name and an invalid suite path, which still stop the run at startup.

Organizing Groups into Suites

To organize many groups, put each in a suite by passing a TSuitePath to its base class constructor, ahead of the group's own name. A suite path names nested suites, outermost first, separated by .:

TTest_TConsole::TTest_TConsole()
    : inherited(TSuitePath("Framework.Console"), "TTest_TConsole")
{
}

That puts group TTest_TConsole in suite Console, inside suite Framework. TAutoTestGroup (see Self-Registering Test Methods) has the same constructor. The group's qualified name, Framework.Console.TTest_TConsole, starts all of its tests' full names, so:

--filter "Framework.*" runs every test in suite Framework, including those in Console, and --filter "Framework.Console.*" runs just those in Console.
--list, the console log and the --report-junit report show its tests as Framework.Console.TTest_TConsole.TestName, and the VCL GUI runner's test tree shows each suite as a node, whose check box checks or unchecks all of its tests.

The registration can name the suite instead, leaving the constructor as it is:

ASW_REGISTER_TEST_GROUP_IN_SUITE(TTest_TConsole, "Framework.Console")

ASW_REGISTER_TEST_GROUP_IN_SUITE_ORDERED(ClassName, suitePath, order) takes an order too. A group whose constructor names a different suite stops the run at startup, and so does an ITestGroup implemented without TTestGroupBase unless its own GetSuitePath() gives the registration's suite.

A suite's groups always run together. Within a suite, or at the top level, groups and suites run in alphabetical order by their own names. ASW_REGISTER_TEST_GROUP_ORDERED's order only places a group among the groups and suites beside it, where a suite counts as order 0, so it never moves a group out of its suite.

Suites only organize groups: they have no SetUp_Group/TearDown_Group of their own. A suite name can't be empty, so a path can't start or end with . or contain ..; constructing a group with such a path, or registering one in it, throws TExceptInvalidSuitePath, which stops the run at startup. Moving a group into a suite changes its tests' full names, as renaming the group would, so update any --filter pattern that names them.

Expecting a Specific Exception Type or Message

SetExceptionExpected(true, ...) passes on any thrown exception, regardless of its type. To also verify the exception's type (matched polymorphically, so a base class also matches its subclasses) and, optionally, that its what() contains a given substring, use the templated overload instead:

SetExceptionExpected<std::invalid_argument>(__func__, __LINE__, "StrToInt32 invalid", "signed 32-bit int");
int32_t i = TStrTool::StrToInt32(invalid);

If the wrong exception type is thrown, or its message doesn't contain the given substring, the test fails with a message showing what was actually caught. This only works for exceptions deriving from std::exception, or from RAD Studio's RTL Exception class when RTL exception support is enabled. A thrown object that doesn't can't be inspected, so a type/message expectation against it fails with an explanatory message rather than silently passing.

An expected exception never hides a failure elsewhere in the test. A failed Assert* still fails the test rather than counting as the expected exception, and so does a failed Check* earlier in the test, even if the expected exception then arrives.

Checking That a Call Throws

SetExceptionExpected() covers a test that ends by throwing. To check a single call instead, so the test carries on afterwards, pass it as a lambda to CheckThrows/AssertThrows, with the expected exception type and, optionally, a substring its message must contain. CheckNoThrow/AssertNoThrow check that a call doesn't throw, and a failure shows what it threw:

CheckThrows<std::out_of_range>([&] { list.At(5); }, __func__, __LINE__, "index past the end");
CheckThrows<std::invalid_argument>([&] { Parse("x"); }, __func__, __LINE__, "not a number", "invalid digit");
CheckEquals(3u, list.Count(), __func__, __LINE__, "a failed call leaves the list unchanged");
CheckNoThrow([&] { list.At(2); }, __func__, __LINE__, "last index");

The type is matched like SetExceptionExpected<TException>()'s: polymorphically, and with RTL exception support, RTL exception types too. A failed Assert*, Fail() or Skip() inside the lambda isn't taken as the thrown exception; it ends the test as usual, unless the requested type is that framework exception (e.g. CheckThrows<TExceptTrue>).

RAD Studio RTL Exceptions (VCL/FMX)

RAD Studio's RTL exceptions (System::Sysutils::Exception and its subclasses, such as EConvertError) are shared by VCL and FMX, and don't derive from std::exception. By default, only the generic SetExceptionExpected(true, ...) matches one, and one a test throws unexpectedly fails it as Unexpected exception: a non-std::exception object.

A C++Builder project that links the RTL can opt in by defining ASWUNITTESTS_RTL_EXCEPTIONS in its project options (Building > C++ Shared Options > Conditional defines). This requires RAD Studio's Clang-based compilers (bcc32c/bcc64x). Defining it for any other compiler is a compile error, so a misconfigured build fails loudly instead of silently dropping the feature. Nothing changes for builds that don't define it.

With it enabled, the templated SetExceptionExpected<TException>() also accepts RTL exception classes, matched polymorphically the same way (so Exception matches any RTL exception). The optional message substring is checked against the exception's Message, converted to UTF-8:

SetExceptionExpected<EConvertError>(__func__, __LINE__, "StrToInt invalid", "not a valid integer");
StrToInt(L"abc");

A requested RTL type never matches a std::exception, and a requested std::exception type never matches an RTL exception. Failure details, including a test's unexpected exception, and exceptions that end the run show RTL exceptions as ClassName: Message (e.g. EConvertError: 'abc' is not a valid integer value), and one that ends the run (e.g. from SetUp_Test()) exits with code 2, like a std::exception.

--test-timeout-seconds runs each test on a worker thread. Expected and unexpected exceptions from the test itself work exactly the same there, because they're caught and checked on that thread. An RTL exception from SetUp_Test() or TearDown_Test(), which ends the run, has to cross back to the main thread, which std::exception_ptr can't do for RTL exceptions (rethrowing one after its handler has exited terminates the process). It therefore arrives as a TExceptRTLException, a std::runtime_error whose what() is the same ClassName: Message text, so the console output and exit code are unchanged. Code that calls a group's Run() directly with a timeout can still check the original type through RTLClass():

catch (TExceptRTLException const& ex)
{
    if (ex.RTLClass()->InheritsFrom(__classid(EConvertError)))
        ...
}

vcl\console\rad370\ASWUnitTests_VCL_Console.cbproj is a working reference setup: a VCL console project that defines ASWUNITTESTS_RTL_EXCEPTIONS and runs this repository's full self-test suite plus the RTL-specific and GUI unit tests in vcl\tests. It has its own Build_*.bat scripts, and writes its executable to vcl\console\rad370\<Platform>\<Config>. The VCL GUI runner is set up the same way.

Comparing System::String (VCL/FMX)

The same ASWUNITTESTS_RTL_EXCEPTIONS define (see above) also lets the string Check/Assert methods take a System::String (UnicodeString): Equals, Contains, StartsWith, EndsWith, and their Not and IC forms. At least one of the two texts must be a System::String. The other may also be a std::string, std::wstring or C string, including a literal:

CheckEquals("Ready", Label1->Caption, __func__, __LINE__, "status after loading");
CheckStartsWithIC(Edit1->Text, L"https://", __func__, __LINE__, "a secure URL");

Both texts are converted to UTF-8 and compared as two std::string values, so a failure shows them the same way. Narrow text is read as UTF-8, as elsewhere in the framework, and a null C string is empty text, as it is for System::String. A System::String converts implicitly from a number or a character, but these methods don't accept either, so CheckEquals(Edit1->Text, 5, ...) is a compile error rather than a comparison with "5". Other RTL string types, such as AnsiString, need converting to System::String first, and the message is still a std::string.

Omitting the Method and Line (C++20)

Every Check*/Assert* method, Skip(), and both forms of SetExceptionExpected() also have an overload without the method and line arguments. It takes an optional std::source_location as its last argument instead, which defaults to the caller's location:

CheckEquals(5, total, "int and int64_t");
Skip("Windows-only feature");
SetExceptionExpected<std::invalid_argument>("StrToInt32 invalid", "signed 32-bit int");

Failure messages then show std::source_location::function_name() as the method. Unlike __func__, its text is up to the compiler, and is typically the full signature, e.g. void TTest_TMyClassToTest::Test_Something() on GCC and Clang, or void __cdecl TTest_TMyClassToTest::Test_Something(void) on MSVC. The method and line overloads remain, for a bare or custom name.

A helper that makes its own checks can take a location and pass it on, so its failures report the helper's caller rather than the helper itself:

// In the class declaration
void CheckIsEven(int value, std::source_location loc = std::source_location::current());

// In the .cpp
void TTest_TMyClassToTest::CheckIsEven(int value, std::source_location loc)
{
    CheckTrue(value % 2 == 0, std::to_string(value) + " should be even", loc);
}

These overloads need C++20's std::source_location, so they're only declared when ASWUnitTests_TestBase.h finds it supported, which it signals by defining ASWUNITTESTS_SOURCE_LOCATION_ENABLED. RAD Studio's 32-bit compilers only support C++17, so they don't have these overloads. Tests that also need to build there should keep the method and line form, or check ASWUNITTESTS_SOURCE_LOCATION_ENABLED.

Comparing C Strings

CheckEquals/AssertEquals and CheckNotEquals/AssertNotEquals compare two C strings (char const* or wchar_t const*, including string literals and character arrays) by content, the same as std::string and std::wstring. A null pointer only matches another null pointer, never a string, not even an empty one:

char const buffer[] = "abc";
CheckEquals("abc", buffer, __func__, __LINE__, "same text in a different buffer passes");

A failed CheckEquals shows both strings, and a failed CheckNotEquals the value they share, for C strings, std::string and std::wstring alike. Wide text is converted to UTF-8, and a null pointer is shown as (null).

The case-insensitive, substring and prefix and suffix checks take two C strings too. In CheckEqualsIC and CheckNotEqualsIC, a null pointer only matches another null pointer, as in CheckEquals. In CheckContains, CheckStartsWith and CheckEndsWith, and their IC forms, a null pointer, as either the text or the part, matches nothing, so they fail and their Not forms pass:

char const* const name = FindName(); // null if not found
CheckStartsWith(name, "ASW", __func__, __LINE__, "fails, rather than crashing, when not found");

Comparing Pointers

CheckEquals/AssertEquals and CheckNotEquals/AssertNotEquals compare any other two pointers by address, and a failure shows both addresses:

CheckEquals(expectedWidget, list.Find("button"), __func__, __LINE__, "finds the widget that was added");
// Check failed for: "Test_Find" (42): Expected "0x1f2a40" but was "(null)". finds the widget that was added

Comparing two pointers to unrelated types (e.g. int* and long*) is a compile error.

CheckSame/AssertSame and CheckNotSame/AssertNotSame check that two values do or don't point to the same object. They take raw pointers, arrays, and smart pointers (std::unique_ptr, std::shared_ptr), in any mix, and compare C strings by address too, unlike CheckEquals:

CheckSame(buffer, Trim(buffer), __func__, __LINE__, "trims in place, returning the same buffer");
CheckSame(cache.Get("a"), cache.Get("a"), __func__, __LINE__, "both calls return the one shared_ptr object");

Checking an Object's Type

CheckIsType<TType>/AssertIsType<TType> check that an object is a TType, and CheckIsNotType/AssertIsNotType that it isn't. They take a raw pointer, a smart pointer (std::unique_ptr, std::shared_ptr) or an object, of a polymorphic class (one with a virtual function), including RTL classes. They use dynamic_cast, so a subclass of TType counts as one, and a null pointer is never one. A failure shows the expected type and the object's actual type:

std::unique_ptr<TShape> const shape = factory.Create("circle");
CheckIsType<TCircle>(shape, __func__, __LINE__, "the factory makes a circle");
// Check failed for: "Test_Create" (42): Expected type "TCircle" but was "TSquare". the factory makes a circle

Type names come from std::type_info::name(), demangled with GCC and Clang, so their exact form (e.g. a namespace or class prefix) depends on the compiler. With RTL exception support enabled, a TObject descendant is named by its ClassName() instead (e.g. TStringList), the same with every compiler.

Comparing Strings, Ignoring Case

CheckEqualsIC/AssertEqualsIC and CheckNotEqualsIC/AssertNotEqualsIC compare two std::string or std::wstring values like CheckEquals/CheckNotEquals, but ignoring case. A failure shows both values, with wide text converted to UTF-8:

CheckEqualsIC("Content-Type", headerName, __func__, __LINE__, "header names ignore case");

Only the ASCII letters A-Z and a-z are matched regardless of case, so the result is the same on every platform and in every locale, and the bytes of a multi-byte UTF-8 character are never changed. Other letters, such as an accented capital and small E, still have to match exactly. The substring and prefix and suffix checks ignore case the same way.

Checking for a Substring

CheckContains/AssertContains pass when a std::string or std::wstring contains a given substring, and CheckNotContains/AssertNotContains pass when it doesn't. The text comes first, then the substring. Unlike CheckTrue(text.find(substring) != std::string::npos, ...), a failure shows both:

std::string const log = "Connected to server";
CheckContains(log, "timeout", __func__, __LINE__, "logs the timeout");
// Check failed for: "Test_Connect" (42): Expected "Connected to server" to contain "timeout". logs the timeout

The comparison is case-sensitive, and every string contains the empty string. A failure shows std::wstring text converted to UTF-8.

CheckContainsIC/AssertContainsIC and CheckNotContainsIC/AssertNotContainsIC do the same, ignoring the case of ASCII letters only, the same way as CheckEqualsIC:

CheckContainsIC(log, "CONNECTED", __func__, __LINE__, "passes");

Checking the Start or End of a String

CheckStartsWith/AssertStartsWith pass when a std::string or std::wstring starts with a given prefix, and CheckEndsWith/AssertEndsWith when it ends with a given suffix. CheckNotStartsWith/AssertNotStartsWith and CheckNotEndsWith/AssertNotEndsWith pass when it doesn't. The text comes first, then the prefix or suffix, read as "text starts with prefix". A failure shows both:

std::string const path = "logs/server.txt";
CheckEndsWith(path, ".log", __func__, __LINE__, "writes a log file");
// Check failed for: "Test_LogPath" (42): Expected "logs/server.txt" to end with ".log". writes a log file

As with the substring checks, the comparison is case-sensitive, every string starts and ends with the empty string, and a failure shows std::wstring text converted to UTF-8. The IC variants (CheckStartsWithIC, CheckEndsWithIC, and their Assert and Not forms) ignore the case of ASCII letters only, the same way as CheckEqualsIC:

CheckStartsWithIC(header, "content-type:", __func__, __LINE__, "passes for \"Content-Type: text/plain\"");

Matching a Regular Expression

CheckMatches/AssertMatches pass when the whole of a std::string or std::wstring matches an ECMAScript regular expression (as std::regex_match does), and CheckNotMatches/AssertNotMatches when it doesn't. To match part of the text, start or end the pattern with .*. A failure shows the text and the pattern:

CheckMatches(stamp, R"(\d{4}-\d{2}-\d{2})", __func__, __LINE__, "an ISO 8601 date");
// Check failed for: "Test_Stamp" (42): Expected "2026-1-7" to match "\d{4}-\d{2}-\d{2}". an ISO 8601 date

Wide text is matched with std::wregex, so . matches one wide character, and a failure shows it as UTF-8. An invalid pattern fails the check, showing std::regex_error's description, rather than throwing.

Comparing Integers of Different Types

CheckEquals/AssertEquals and CheckNotEquals/AssertNotEquals accept any two integer types, not just a matching pair of fixed-width ones, so there's no need for a suffix or cast like 0LL to pick an overload. This includes long and unsigned long (e.g. DWORD) on Windows, and long long on Linux, which match none of the fixed-width types there. The values are compared as numbers, so -1 never equals an unsigned value, unlike with the built-in ==:

int64_t total = 5;
CheckEquals(5, total, __func__, __LINE__, "int and int64_t");
CheckEquals(-1, 4294967295u, __func__, __LINE__, "fails, where -1 == 4294967295u is true");

bool is the exception: comparing a bool with an integer remains a compile error, since it's usually a mistake.

Comparing Enums

CheckEquals/AssertEquals and CheckNotEquals/AssertNotEquals also compare two values of the same scoped enum (enum class) type. Unlike CheckTrue(mode == TColorMode::Always, ...), a failure shows both values, as their underlying numbers:

CheckEquals(TColorMode::Always, options.ColorMode, __func__, __LINE__, "--color always");
// Check failed for: "Test_ColorOption" (42): Expected "1" but was "0". --color always

Comparing two different enum types, or an enum class with an integer, is a compile error. An unscoped enum converts to an integer, so it's compared like one, as before.

Comparing Memory

CheckEqualsMem/AssertEqualsMem compare a number of bytes at two addresses, and CheckNotEqualsMem/ AssertNotEqualsMem check that they differ. A failure shows the offset of the first differing byte, and up to 16 bytes from there in hex:

CheckEqualsMem(expected, packet.Data(), sizeof(expected), __func__, __LINE__, "encoded header");
// Check failed for: "Test_Encode" (42): Bytes differ at offset 2 of 4: expected "03 04" but was "FF 04". encoded header

Zero bytes, or the same pointer twice, are always equal, without reading either. Exactly one null pointer is never equal to the other memory, and isn't read either.

Comparing Floating-Point Values

There are no float/double overloads of CheckEquals/AssertEquals. Exact equality comparison of floating-point values is unreliable (e.g. 0.1f + 0.2f != 0.3f). Use CheckNear/AssertNear instead, which pass when the absolute difference between the two values is within a given tolerance, and CheckNotNear/AssertNotNear for the opposite (asserting two values are not within tolerance of each other):

float sum = 0.1f + 0.2f;
CheckNear(0.3f, sum, 0.0001f, __func__, __LINE__, "sum should be close to 0.3");

Pick a tolerance appropriate to the computation being tested; there's no built-in default, since a sensible tolerance depends heavily on the magnitude and accumulated error of the values involved.

A NaN is near nothing, not even another NaN, so CheckNear fails and CheckNotNear passes when either value is a NaN, whatever the tolerance. Equal infinities are near each other.

Comparing Greater Than and Less Than

CheckGreaterThan, CheckGreaterThanOrEqual, CheckLessThan and CheckLessThanOrEqual, and their Assert versions, compare a value with a bound. The value comes first, then the bound, read as "value >= bound". That's the other way round from CheckEquals, whose expected value comes first. Unlike CheckTrue(count >= 1, ...), a failure shows both:

CheckGreaterThanOrEqual(count, 1, __func__, __LINE__, "at least one item");
// Check failed for: "Test_Items" (42): Expected 0 to be >= 1. at least one item

They accept any two integer or floating-point types except bool. Two integers are compared by value, like CheckEquals does, so -1 is less than any unsigned value. When either value is floating point, both are compared as their common type, as the built-in operators do, and a NaN fails every check.

Checking for Empty

CheckEmpty/AssertEmpty and CheckNotEmpty/AssertNotEmpty take anything with an empty() member, such as a std::string, std::wstring, std::vector or std::map, and with RTL support, a System::String. Unlike CheckTrue(list.empty(), ...), a failure shows what was there: the text, or the element count of a container with a size():

CheckEmpty(errors, __func__, __LINE__, "no errors reported");
// Check failed for: "Test_Load" (42): Expected empty but had 2 elements. no errors reported
CheckEmpty(GetWarning(), __func__, __LINE__, "no warning");
// Check failed for: "Test_Load" (43): Expected empty but was "low disk space". no warning

Checking for Null

CheckNull/AssertNull and CheckNotNull/AssertNotNull compare a value with nullptr. They accept anything that can be compared with nullptr, such as a raw pointer, std::unique_ptr, std::shared_ptr or std::function:

std::unique_ptr<TWidget> widget = factory.Create("button");
AssertNotNull(widget, __func__, __LINE__, "factory should create a button");
CheckNull(factory.Find("missing"), __func__, __LINE__, "no widget has that name");

A C string is checked as a pointer, so an empty string such as "" is not null.

Failing a Test

Call Fail(method, line, msg) to fail the current test unconditionally, e.g. on a code path the test should never reach. Like an Assert* method, it aborts the test, and it fails it even while an exception is expected:

switch (shape.Kind())
{
    case TShapeKind::Circle: CheckNear(3.14159, shape.Area(), 0.0001, __func__, __LINE__, "unit circle"); break;
    case TShapeKind::Square: CheckNear(1.0, shape.Area(), 0.0001, __func__, __LINE__, "unit square"); break;
    default: Fail(__func__, __LINE__, "unexpected shape kind");
}

Skipping a Test

Call Skip(method, line, reason) from within a test to abort it and have it reported as skipped. It is separately counted from passed/failed, and does not affect the process exit code. No explicit return is needed afterward, since Skip() throws to unwind the rest of the test body, the same way Assert* methods do:

void TTest_TMyClassToTest::Test_WindowsOnlyFeature()
{
#if !defined(_WIN32)
    Skip(__func__, __LINE__, "Windows-only feature");
#endif
    // ... test body ...
}

This keeps a known-broken, environment-specific, or not-yet-implemented test's registration (and its place in --list output) intact, instead of commenting out or deleting its RegisterTest() call and losing the reminder that it exists. The reason is required, so future readers always know why a test is being skipped.

Test modules themselves inherit from TTestGroupBase, and each test method is registered within that module's constructor, as below, or registers itself where it's defined (see Self-Registering Test Methods). For example:

// Whatever include at the top of the file for your `TMyClassToTest` class, etc.

//---------------------------------------------------------------------------
TTest_TMyClassToTest::TTest_TMyClassToTest()
    : inherited("Name_of_My_Module_Unit_For_TMyClassToTest")
{
    // Can register test methods this way
    RegisterTest([this]()
        {
            Test_NameOfMethodBeingTested_WhatIsBeingTested();
        }, "NameOfMethodBeingTested_WhatIsBeingTested");

    // Or you can register test methods this way
    RegisterTest(&TTest_TMyClassToTest::Test_NameOfMethodBeingTested_WhatIsBeingTested,
        "NameOfMethodBeingTested_WhatIsBeingTested");
    RegisterTest(&TTest_TMyClassToTest::Test_NameOfMethod2BeingTested_WhatIsBeingTested,
        "NameOfMethod2BeingTested_WhatIsBeingTested");
}
//---------------------------------------------------------------------------
TTest_TMyClassToTest::~TTest_TMyClassToTest()
{
}
//---------------------------------------------------------------------------
void TTest_TMyClassToTest::SetUp_Group()
{
    // Any setup code to execute before running the group
}
//---------------------------------------------------------------------------
void TTest_TMyClassToTest::SetUp_Test(ITestCase& /*testCase*/)
{
//    Log("Setting up test: " + testCase.GetName());
    // Any setup code to execute before running a test
}
//---------------------------------------------------------------------------
void TTest_TMyClassToTest::TearDown_Group()
{
    // Any clean up code to run after the group test is done
}
//---------------------------------------------------------------------------
void TTest_TMyClassToTest::TearDown_Test(ITestCase& /*testCase*/)
{
//    Log("Tearing down test: " + testCase.GetName());
    // Any clean up code to run after a test
}
//---------------------------------------------------------------------------

A test name can be registered only once per group. Registering one again (with RegisterTest(), RegisterTestCases() or ASW_TEST) throws TExceptDuplicateTestName from the group's constructor, which stops the run at startup with a message naming the group and the test, since --filter, --list, the JUnit report and the VCL GUI runner couldn't tell the two tests apart.

Self-Registering Test Methods

A test registered in the constructor is easy to forget: the method compiles and the group runs, just without it. ASW_TEST (declared in src\ASWUnitTests_Registry.h) instead defines the test method and registers it with its group in one step, so writing the test is registering it. To use it, derive the group from TAutoTestGroup<itself> instead of TTestGroupBase, and declare its test methods public:

// Test_TMyClassToTest.h
class TTest_TMyClassToTest : public TAutoTestGroup<TTest_TMyClassToTest>
{
private:
    typedef TAutoTestGroup<TTest_TMyClassToTest> inherited;

public: // Test methods, each defined with ASW_TEST
    void Test_NameOfMethodBeingTested_WhatIsBeingTested();
    void Test_NameOfMethod2BeingTested_WhatIsBeingTested();

public:
    TTest_TMyClassToTest();
    // ... SetUp_Group(), TearDown_Group(), etc., as before ...
};

// Test_TMyClassToTest.cpp
TTest_TMyClassToTest::TTest_TMyClassToTest()
    : inherited("Name_of_My_Module_Unit_For_TMyClassToTest")
{
    // No RegisterTest() calls needed for the ASW_TEST tests below.
}

ASW_TEST(TTest_TMyClassToTest, NameOfMethodBeingTested_WhatIsBeingTested)
{
    // ... test body, exactly as in a Test_ method; __func__ is still the method's name ...
}

ASW_TEST(TTest_TMyClassToTest, NameOfMethod2BeingTested_WhatIsBeingTested)
{
    // ... test body ...
}

ASW_TEST(ClassName, TestName) defines ClassName::Test_TestName() and registers it as the test TestName. The method still needs its declaration in the class, since C++ can't add a member from outside the class definition, and that declaration must be public, since ASW_TEST takes the method's address from outside the class. Getting either wrong is a compile error, never a test that silently doesn't run: a private method fails to compile, and so does ASW_TEST on a class that doesn't derive from TAutoTestGroup<ClassName>.

The order is deterministic: a group runs its ASW_TEST tests first, in alphabetical order by name (whatever order they're defined in), then any tests its constructor registers with RegisterTest() or RegisterTestCases(), in the order it registers them, so the two styles can be mixed in one group. --shuffle, --filter, --list, the JUnit report and the VCL GUI runner treat ASW_TEST tests exactly like any other. Parameterized tests are still registered in the constructor with RegisterTestCases(), next to their data.

Keep a group's ASW_TEST tests in the same .cpp file as its ASW_REGISTER_TEST_GROUP. A test registered in the constructor is linked in because the constructor refers to it, but nothing refers to an ASW_TEST test, so a .cpp file holding only ASW_TEST tests could be left out by a linker pulling the test code from a static library, just as a group's own file could. Compiling the test files directly into the test executable, as the projects here do, avoids both.

A group that overrides RegisterTest(TTestCase const&) doesn't see its ASW_TEST tests pass through that override, since they're registered from the TAutoTestGroup constructor, before the derived class is constructed.

See tests\Test_ASWTools_Random.cpp for a working example.

Parameterized Tests

RegisterTestCases() registers one test case per element of a std::vector<TParam>, calling the given method with each element in turn, instead of hand-writing a loop inside a single test or duplicating near-identical test methods for each input. Each row becomes an independent, individually named, individually filterable test case, so --filter, --shuffle, colorized output, and the JUnit report all work on it exactly like any other test:

struct THexCase
{
    char Input;
    int Expected;
};

// In the constructor, in place of a plain RegisterTest() call:
std::vector<THexCase> const hexCases =
{
    { 'A', 10 },
    { 'f', 15 },
    { '0', 0 },
};
RegisterTestCases(&TTest_TMyClassToTest::Test_HexSingleToByte, "HexSingleToByte", hexCases);

// Test_HexSingleToByte(THexCase const& testCase) then runs once per row, generating
// test names "HexSingleToByte[0]", "HexSingleToByte[1]", "HexSingleToByte[2]".

Pass an optional std::function<std::string (TParam const&)> name generator as a fourth argument to label each row with something more meaningful than its index (e.g. "HexSingleToByte[A]"), which is especially useful for reading --filter matches or a failing row's name in CI output.

Submodule Integration

This repository's own cmake\CMakeLists.txt, rad370\ASWUnitTests.cbproj, and the RAD Studio projects under vcl only build this repo's own example tests and toTest code for its own development and CI. Don't use them from a consuming project, and don't modify them. Doing either means your changes live inside the submodule and get lost or conflict the next time you update it. Instead, add ASWUnitTests as a git submodule (e.g. into third_party\asw-unit-tests) and reference its src files from your own project's build file, alongside your own test modules:

my-project/
+-- third_party/asw-unit-tests/   <- git submodule, never modified, freely updated
|   +-- src/                      <- framework core (never touched)
|   +-- vcl/gui/src/              <- VCL GUI runner, if you use it (never touched)
|   `-- cmake/, rad370/, tests/, toTest/, other vcl/ folders   <- this framework's own example build, unused by you
+-- tests/                        <- your own test modules (Test_MyClass.cpp/.h), self-registered
`-- CMakeLists.txt / .cbproj      <- your own build file, in your own repo

Since src\main.cpp only calls into TTestHandler and never references a specific test class, you compile it as-is from the submodule. There's no need to copy or duplicate it into your own tree.

CMake

Include src\ASWUnitTests_Sources.cmake from your own CMakeLists.txt rather than listing the framework's source filenames by hand; it exports ASWUNITTESTS_SOURCES (the compiled .cpp files) and ASWUNITTESTS_SOURCE_DIR (for the include path). It stays in sync automatically if a future version of this framework adds a core file:

include(third_party/asw-unit-tests/src/ASWUnitTests_Sources.cmake)

add_executable(MyTests
    ${ASWUNITTESTS_SOURCES}
    tests/Test_MyClass.cpp
)

target_include_directories(MyTests PRIVATE
    ${ASWUNITTESTS_SOURCE_DIR}
    tests
)

--test-timeout-seconds uses std::thread/std::future, which needs an explicit link against a threading library on Linux and some MinGW-w64 distributions (a no-op on MSVC and toolchains that need no extra linker flag). Add it the same way this repository's own cmake\CMakeLists.txt does:

find_package(Threads REQUIRED)
target_link_libraries(MyTests PRIVATE Threads::Threads)

RAD Studio / Visual Studio / other IDE projects

Add the same files listed in ASWUNITTESTS_SOURCES from the submodule's src folder to your own project, plus your own test modules. Check src\ASWUnitTests_Sources.cmake for added files after updating the submodule.

For a C++Builder project that links the VCL or FMX, also define ASWUNITTESTS_RTL_EXCEPTIONS to enable RTL exception support and System::String comparisons. To run your tests in the VCL GUI runner instead of a console, see that section for the files it needs.

Coding Standards

To use uncrustify (for coding standards (pretty formatting) for this repo):

Get uncrustify and ensure that the path to uncrustify.exe is added to the Windows Path environment variable. https://github.com/uncrustify/uncrustify
Run the following command locally to set the git hooks directory (uncrustify will run upon commit):

git config --local core.hooksPath .githooks/

Name		Name	Last commit message	Last commit date
.githooks		.githooks
.github/workflows		.github/workflows
cmake		cmake
rad370		rad370
src		src
tests		tests
toTest		toTest
vcl		vcl
.gitattributes		.gitattributes
.gitignore		.gitignore
.uncrustify.cfg		.uncrustify.cfg
AGENTS.md		AGENTS.md
CHANGELOG.md		CHANGELOG.md
CLAUDE.md		CLAUDE.md
CONTRIBUTING.md		CONTRIBUTING.md
Deploy.bat		Deploy.bat
LICENSE		LICENSE
README.md		README.md

Latest commit

History

Folders and files

Repository files navigation

ASWUnitTests - https://github.com/ASWSoftware/asw-unit-tests

Features

Writing Tests

Running Tests

Reporting

Platforms and Integration

Donations:

How to Use

CMake

Versions

Command Line Options

VCL GUI Runner

Registering Tests

Organizing Groups into Suites

Expecting a Specific Exception Type or Message

Checking That a Call Throws

RAD Studio RTL Exceptions (VCL/FMX)

Comparing System::String (VCL/FMX)

Omitting the Method and Line (C++20)

Comparing C Strings

Comparing Pointers

Checking an Object's Type

Comparing Strings, Ignoring Case

Checking for a Substring

Checking the Start or End of a String

Matching a Regular Expression

Comparing Integers of Different Types

Comparing Enums

Comparing Memory

Comparing Floating-Point Values

Comparing Greater Than and Less Than

Checking for Empty

Checking for Null

Failing a Test

Skipping a Test

Self-Registering Test Methods

Parameterized Tests

Submodule Integration

CMake

RAD Studio / Visual Studio / other IDE projects

Coding Standards

About

Topics

Resources

Contributing

Stars

Watchers

Forks

Releases

Packages

Contributors

Languages