[dependabot]

Bumps minimatch to 11.0.8 and updates ancestor dependency glob. These dependencies need to be updated together.

Updates minimatch from 10.2.6 to 11.0.8

Release notes

Sourced from minimatch's releases.

v11.0.7

• Quadratic compile time for long wildcard patterns (regression in 11.0.0 mergeRows)

Fixes GHSA-cf2h-pxjq-68xw: GHSA-cf2h-pxjq-68xw

Changelog

Sourced from minimatch's changelog.

change log

11.0

• Match each path portion with Matcher from @isaacs/nonrecursive-glob-match, in place of a RegExp. Items in Minimatch.set are now strings, Matcher objects, or GLOBSTAR.
• Remove makeRe(), Minimatch#regexp, and the MMRegExp type.
• Remove the AST class.
• Remove the maxExtglobRecursion option.
• An empty path portion, such as the last one in a/b/, only matches an empty pattern portion. So a/b/ no longer matches a/b/?(x) or a/b/*(x), the same as a/b/*.
• Add the normalize option, to normalize unicode in the pattern and in each portion of the tested path.
• Remove the debug option and the debug() method.
• Remove the matchOne(), slashSplit(), and levelTwoFileOptimize() methods. They are internal now.
• Fix patterns with more than one ** and sections of different lengths between them, such as **/a/b/c/**/d/**, which failed to match some paths since 10.2.3.
• Fix partial matching of patterns with **, which since 10.2.3 matched some paths under a dot portion that ** can not walk, and did not match some paths that end in the pattern's last portion.
• partial matching of patterns with many ** no longer takes exponential time.
• On Windows, a .. no longer removes the drive letter, or the host and share of a UNC path, at the start of a pattern or (at optimization level 2) a path. So C:/a/../../x no longer matches x or /x.
• On Windows, compare the host and share of UNC paths like //host/share/... case-insensitively, the same as drive letters.
• On Windows, long UNC paths like //?/UNC/host/share/... match //host/share/... and vice versa, the same as //?/c:/... and c:/....
• At optimization level 2, throw a RangeError if splitting **/.. portions would make more than braceExpandMax patterns, or add more than 1,000,000 path portions. Before, a short pattern could take minutes to compile.
• At optimization level 2, dedupe patterns without comparing each pair, so that a large set is deduped in about linear time. Fix {**/x,x/y}, which was deduped to **/x, so x/y did not match.
• Match a numeric brace range of 100 or more values, such as {0..999}, as one pattern portion, in place of one pattern for each value. For a glob walk, this is one directory read, in place of a stat for each value. hasMagic() is true for these

... (truncated)

Commits

• 35c928b 11.0.8
• 9ceff13 raise a more useful error when faced with excessive extglobs
• 784603e properly escape escaped braces, leading ! and #
• d70a7bb Add item weight to cache
• 9880b42 11.0.7
• 8a26917 Quadratic compile time for long wildcard patterns (regression in 11.0.0 `merg...
• 4362d0b 11.0.6
• b63dfb7 add missing environment setting to oidc release workflow
• fdc1891 npm pkg fix
• 3e5984b release with oidc
• Additional commits viewable in compare view

Maintainer changes

This version was pushed to npm by GitHub Actions, a new releaser for minimatch since your current version.

Updates glob from 13.0.6 to 14.0.5

Changelog

Sourced from glob's changelog.

changeglob

14

• Use minimatch 11. Each portion of a pattern with magic is now matched with a Matcher from @isaacs/nonrecursive-glob-match in place of a RegExp, so patterns can no longer cause ReDoS. Matching follows the minimatch 11 changes, which are closer to Bash in some edge cases.
• Pattern#pattern() returns a Matcher for a portion with magic. The MMPattern type is now minimatch's ParseReturnFiltered, and the new MMMatcher type is the Matcher part of it.
• Rename Pattern#isRegExp() to isMatcher(), and Processor#testRegExp() to testMatcher().
• Remove the debug option, which minimatch no longer has.
• Add the normalize option, to normalize unicode in the pattern and in the file names that it is matched against.
• GlobWalker#walk() and walkSync() return arrays in place of sets, and MatchRecord#entries() is removed.
• ignore patterns that start with / now start at the same place as other patterns that start with /: the root option if set, or else the root of the cwd, such as C:\ on Windows.
• ignore patterns follow the windowsPathsNoEscape option, the same as other patterns.
• On Windows, patterns that start with a long UNC root like //?/UNC/host/share/ walk that share, the same as //host/share/.
• Faster ignore patterns (about 1.2 to 3 times faster), and less work for each entry in a walk (about 10% faster sync, and 15% to 30% faster async, for large trees).
• Allow const string[] or readonly string[] as ignore option or pattern argument.
• When the signal aborts an async walk, the walk stops. Before, it rejected, but continued to read directories.

13

• Move the CLI program out to a separate package, glob-bin. Install that if you'd like to continue using glob from the command line.

12

• Remove the unsafe --shell option. The --shell option is now ONLY supported on known shells where the behavior can be implemented safely.

11.1

... (truncated)

Commits

• 7473a9c 14.0.5
• f5a23ff release from OIDC
• d8e1a60 update deps
• f26bdac 14.0.4
• 300eae3 minimatch@11.0.5
• e32c905 minimatch@11.0.3
• 800af17 more readme formatting/typo fixing
• d1bfd61 fix note in GH markdown
• 8652101 fix typo in JSDoc of the "cwd" option
• fc93fd5 14.0.3
• Additional commits viewable in compare view

Maintainer changes

This version was pushed to npm by GitHub Actions, a new releaser for glob since your current version.

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.

[Changyong Gong (chagong)]

Decision: NOT_MERGED

Dependabot PR Manager result

Repository: microsoft/vscode-java-debug
Pull request: microsoft/vscode-java-debug#1731 — chore(deps): bump minimatch and glob
Update: grouped major updates: direct development dependency glob 13.0.6 -> 14.0.5 and transitive minimatch 10.2.6 -> 11.0.8; minimatch release notes include security fixes.
Safety assessment: Dependabot-only commit; current base is an ancestor. Manifest/lockfile-only starting diff requires the compatibility gate for the major tool update; the gate is incomplete. glob is used for test discovery in test/suite/index.ts; full compatibility and transitive-change assessment remain incomplete.
Final state: head 7d093e3; OPEN, MERGEABLE, BLOCKED; REVIEW_REQUIRED. CI: 6 success, 1 neutral, 2 failures; all 4 reported required checks pass. microsoft.vscode-java-debug-ci-vsix and microsoft.vscode-java-debug-ci-vsix (Build Validate dependencies from CFS) are INDETERMINATE: annotations report a Bash exit code 1, but Azure logs require authentication (HTTP 401).
Actions taken: checked ancestry, provenance, reviews, diff, current-head CI and test-discovery usage; GitHub Actions Linux, Windows and macOS lint, package and extension tests passed. CI log skill could not retrieve the external Azure job; no rebase, rerun, remediation, approval or merge attempted.
Reason: Failed Azure checks lack accessible logs and cannot be classified; the compatibility gate is incomplete, and code-owner review is required.
Next action: A maintainer with Azure access must inspect the CFS failure logs, resolve or classify the failure, complete the major-update compatibility audit, and obtain required review before merging.