fdcan
Here are 27 public repositories matching this topic...
Embedded code and PCB for CAN FD to USB converter
-
Updated
May 18, 2026 - C
This is an example tailored to different STM32 Nucleo boards demonstrating that the STM32 FDCAN can reach 8Mb/s during the data phase.
-
Updated
Mar 19, 2025 - C
The main purpose of this system is to pump air pressure into a PVC tank, simulating the tire of a tractor, so it can adjust to terrains such as asphalt, mud and dirt. This would be useful for the tractor’s performance when it encounters these different lands and cause less damage to the tractor itself.
-
Updated
May 9, 2023 - C
-
Updated
Sep 6, 2022 - C
STM32H723 micro-ROS differential-drive robot firmware — FreeRTOS + USB CDC transport to ROS 2 Jazzy
-
Updated
Nov 9, 2026 - C
Modular CAN bus communication library with multi-instance networking support. Features buffered RX/TX message queues, configurable parsers, timeout handling, and network replication modes for embedded systems.
-
Updated
Oct 28, 2026 - C
A small project to make a FDcan work on a nucleo stm32g474re. Stm32Cube and Zephyr RTOS platform are used.
-
Updated
Oct 9, 2024 - C
STM32G4 motor control platform with encoder feedback, PID regulation, CAN communication and Python-based automated validation.
-
Updated
Sep 7, 2026 - C
Real-time motor-control firmware for STM32H7 — a dual FDCAN master that drives two brushless motor controllers, parses the full CAN command/telemetry protocol (drive, status, error, parameter R/W), and streams live motor data over Ethernet, all under FreeRTOS.
-
Updated
Aug 28, 2026 - C
Can/FDCan prescalar finder class
-
Updated
Dec 24, 2024 - C++
ISR-safe C11 token-bucket logging rate limiter & ISO 11898-1:2015 Bus-Off auto-recovery driver for Zephyr RTOS CAN subsystem.
-
Updated
Nov 11, 2026 - C
Add this topic to your repo
To associate your repository with the fdcan topic, visit your repo's landing page and select "manage topics."