ft232h

Program allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino, FT232H.

An FPGA-based FT232H/FT600 chip controller for rapid data transmission via USB. 使用FT232H/FT600芯片进行FPGA与电脑之间的高速数据传输。

AsProgrammer dregmod allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports Buzzpirat, Bus Pirate, CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino & FT232H

PyTmcStepper is a pure Python library for controlling Trinamic stepper drivers via UART or SPI on platforms like Raspberry Pi and MicroPython devices.

flashrom Dreg's build for Windows x64 & x32 Buzzpirat, raiden_debug_spi, ft2232_spi, serprog, buspirate_spi, dediprog, developerbox, pony_spi, usbblaster_spi, pickit2_spi, ch341a_spi, ch347_spi, digilent_spi, stlinkv3_spi, dirtyjtag_spi.. x32 build is included.

FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)

🔴 SystemVerilog FPGA cores to communicate with FTDI Synchronous/Asynchronous FIFOs (FT245 protocol)

Pretend your PC a Raspberry Pi or an ESP32 to connect I2C / SPI / GPIO / UART peripherals.

Check https://github.com/ftdi-rs project for the up-to-date implementation of FTDI MPSSE embedded HAL.

Use an MPSSE FTDI device as a JTAG interface in Quartus tools

Bitbang interfacing through FTx232 chips

Signal generators ( AD9833, AD9834, AD9850, ADF4351) tools box.

A tool for reading and writing data in SPI flash memory chips using a FT232H

A tool for configuring Xilinx Spartan 3 FPGAs via FT232H-based USB-to-JTAG adapter

Connect a modern, high-resolution camera to an FPGA and easily develop your applications

N64 ROM Dumper using FT232H

KiCad Footprints for CJMCU FT232H Board

Automatic standing desk positioning based on active session time.

GB Dumper using FT232HL

Code samples for the MagAlpha magnetic angle sensor family